JIMPOUCH INSTRUCTIONS - PLEASE READ VERY CAREFULLY

(NB - It is advised that at least TWO people oversee the installation process to ensure JimPouch is fitted in the best possible place on equipment and surfaces)

1. When choosing a suitably flat, smooth, non-coated surface to attach JimPouch, make sure the surface is greater in size than the adhesive strip on the back of JimPouch.
2. Using wipe provided, carefully clean area where JimPouch is to be attached. Let area dry for around 5 minutes.
3. CAUTION: Adhesive strip is very strong. Make sure you know exactly where you would like to place JimPouch. Do not attach JimPouch then quickly try and move it somewhere else. Gently peel off the film from the back of the adhesive strip and apply JimPouch to surface. Press firmly for at least 30 seconds. (VERY IMPORTANT: Make sure there are no gaps between the adhesive strip and the surface area it's attached to, as JimPouch will fail to stick properly).
4. JimPouch should be left to bond to a surface for at least 8 hours before use (recommended period is 24 hours).
5. It is recommended JimPouch be left to bond with a surface overnight (i.e. after closing).
6. When removing JimPouch, it is highly recommended a strong piece of wire (such as cheese wire) or dental tape is used to cut through the adhesive. Gently peel/wipe away any excess adhesive from the surface and from JimPouch.
7. Do not scratch or scrape excess adhesive from surface or from JimPouch. Doing so will damage both the surface and JimPouch.
8. We recommend that JimPouch is stuck to metal, firm plastic or Perspex surfaces (such as weight guards).
9. We recommend you conduct your own health and safety assessment.
10. We recommend JimPouch is attached to gym equipment within 12 months of date of purchase. If this time period expires, we recommend the adhesive strip(s) is/are replaced immediately (place an order at www.jimpouch.com).